All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas
Picture Name

PTS-C Valve Position Monitor


Product Description

  UL and cUL Listed, FM Approved, CSFM Listed, NYMEA Accepted

  Dimensions: 7" L x 3.75 W x 3" D (including bracket)(17,7 cm x 9,5 cm x 7,6 cm)

  Weight: 13.6 oz.(5 g.)

  Enclosure: Non-Corrosive Composite Material

  Environmental Limitations:

  • NEMA 4 and NEMA 6P rated enclosure when proper electrical fifi ttings are used. (IP67)

  • Temperature range: -40° F to 140° F (-40° C to 60° C)

  Housing Cover Tamper: Activated by housing cover removal.

  Contact Ratings: SPDT Plug Contacts: 100 mA at 28 VDC/AC   250 mA at 12 VDC/AC

  SPDT Cover Tamper: 250 mA at 28 VDC/AC

  Cable: 2-wire, 18 Ga. Waterproof - Approx. 8'(43m) long

  WARNING

  As Stipulated By Factory Mutual And Underwriters Laboratories

  This unit is not intended or designed for ordinary use. It is a special application device to be used for unusual conditions such as non-rising stem

  gate valves where no other approved or listed method of protection is available or practical. As this unit does not meet NFPA codes and standards,

  requiring restoration signal when the valve is positioned to normal, special attention should be given by the responsible parties to assure that the

  proper operation of this device is maintained. This device should only be restored to normal when the valve is in the normal condition.