The characteristics of Siemens detectors:

1. Photoelectric sensors utilize the principle of forward scattering and are exceptionally sensitive to smoke particle reactions

2. Using detection algorithms for intelligent signal evaluation, providing early safety smoke detection

3. Built in 16 bit high-performance processing chip, intelligent distribution, quick identification of authenticity of fire alarms, reducing bus transmission and main CPU workload

4. Automatic detection and warning of application environment changes (such as when room usage changes)

5. Continuously compensate the measured values digitally to maintain a constant sensitivity of the detector throughout its entire working cycle; Detectors contaminated will be reported on the controller

6. Built in self-test function

7. Built in short-circuit isolator to isolate faulty circuit parts in the circuit

8. Power on adaptive addressing, no need for manual dialing or preset addressing, eliminating human error

9. Excellent resistance to temperature changes and airflow interference

10. The specially designed measurement chamber ensures that dust and fiber deposition do not reduce detector sensitivity

11. Polishing low reflection maze structure ensures strict control of light reflection path, fully absorbing interfering light, effectively preventing uncontrolled scattered light from shining on the receiver and affecting detection behavior mode

12. Built in moisture-proof protective coating, providing high moisture-proof and corrosion resistance performance

13. Extremely high anti electromagnetic interference performance

14. The detector is equipped with a freely programmable control output that can be connected to indicator lights or control modules - it can be linked by other detectors or detector groups

15. Built in reaction indicator light, providing directionless indication (360 ° visible angle)

16. Connected to the controller using a two wire bus system, supporting multiple methods such as loop, branch, and branch

17. The detector comes with self-adhesive labels for accurate labeling on installation drawings

18. Detectors can be disassembled within a height of 8 meters without the need for a ladder

19. Using environmentally friendly and recyclable materials