The main monitoring object of Siemens electrical fire system is electrical fire accidents. Through Siemens electrical fire monitoring system, we can monitor potential hazards that may cause electrical fire accidents in real time and eliminate them in real time, eliminating electrical fire accidents in their early stages. However, the Siemens electrical fire monitoring system can only monitor electrical fire accidents under normal operation. Once the electrical fire monitoring system malfunctions, it becomes difficult to monitor electrical fire accidents. So, what faults are prone to occur in electrical fire monitoring systems? How to solve the problem of electrical fire monitoring system failure? Below, the Siemens electrical fire system manufacturer will tell you about it

Display fault: When the electrical fire monitoring system is powered on, the electrical fire monitoring detector in the system does not display anything. If this situation occurs, we can check whether the input power of the device is in normal working condition and whether its wiring is correct. If there is no problem with the power supply, it is necessary to consider whether it is a problem with product quality. If there is a problem with product quality, it is necessary to replace the product in a timely manner to restore the monitoring function of the entire system.

Control failure: When the electrical fire monitoring detector in the electrical fire monitoring system experiences such a failure, a good solution is to replace the relevant components, and then test the replaced components before normal use.

Communication failure: When a communication failure occurs in the electrical fire monitoring system, the first thing to consider is whether the communication equipment in the system has been affected by electromagnetic interference. If so, the solution is relatively simple. After eliminating these electromagnetic interference, the communication equipment can return to normal.

Other faults: In addition to the above-mentioned faults, common faults in electrical fire monitoring systems may also cause blurry LED display screens. The main reason for this problem is to find the cause from the installation and use methods. LED display screens in electrical fire monitoring systems must be installed in a dry and cool environment, and attention should be paid to avoiding direct sunlight, which can ensure the service life of LED display screens.

The electrical fire monitoring system can only monitor electrical fires under normal working conditions, and any problem in any link will seriously affect the monitoring effect. When a malfunction is found in the electrical fire monitoring system, it should be promptly resolved and restored to its normal working state.